[OE-core] [PATCH 1/3] gummiboot: Remove/change gummiboot references with systemd-boot
Alejandro Hernandez
alejandro.hernandez at linux.intel.com
Wed Dec 21 17:08:04 UTC 2016
After systemd-boot was introduced, its been tested for a while with no major
issues being found until now, this patch completely replaces all gummiboot
instances with systemd-boot ones, taking the next step into cleaning
up systemd-boot/gummiboot.
[YOCTO #10332]
Signed-off-by: Alejandro Hernandez <alejandro.hernandez at linux.intel.com>
---
meta/classes/fs-uuid.bbclass | 2 +-
meta/classes/systemd-boot.bbclass | 4 +---
meta/conf/distro/include/distro_alias.inc | 2 +-
meta/lib/oeqa/controllers/masterimage.py | 4 ++--
meta/recipes-bsp/systemd-boot/systemd-boot_232.bb | 2 +-
.../initrdscripts/files/init-install-efi-testfs.sh | 12 +++++-----
.../initrdscripts/files/init-install-efi.sh | 12 +++++-----
scripts/contrib/mkefidisk.sh | 26 +++++++++++-----------
scripts/lib/wic/plugins/source/bootimg-efi.py | 22 +++++++++---------
9 files changed, 41 insertions(+), 45 deletions(-)
diff --git a/meta/classes/fs-uuid.bbclass b/meta/classes/fs-uuid.bbclass
index 313c5a3..9b53dfb 100644
--- a/meta/classes/fs-uuid.bbclass
+++ b/meta/classes/fs-uuid.bbclass
@@ -13,7 +13,7 @@ def get_rootfs_uuid(d):
bb.fatal('Could not determine filesystem UUID of %s' % rootfs)
# Replace the special <<uuid-of-rootfs>> inside a string (like the
-# root= APPEND string in a syslinux.cfg or gummiboot entry) with the
+# root= APPEND string in a syslinux.cfg or systemd-boot entry) with the
# actual UUID of the rootfs. Does nothing if the special string
# is not used.
def replace_rootfs_uuid(d, string):
diff --git a/meta/classes/systemd-boot.bbclass b/meta/classes/systemd-boot.bbclass
index 60729a7..6718783 100644
--- a/meta/classes/systemd-boot.bbclass
+++ b/meta/classes/systemd-boot.bbclass
@@ -4,9 +4,7 @@
# systemd-boot.bbclass - The "systemd-boot" is essentially the gummiboot merged into systemd.
# The original standalone gummiboot project is dead without any more
-# maintenance. As a start point, we replace all gummitboot occurrences
-# with systemd-boot in gummiboot.bbclass to have a base version of this
-# systemd-boot.bbclass.
+# maintenance.
#
# Set EFI_PROVIDER = "systemd-boot" to use systemd-boot on your live images instead of grub-efi
# (images built by image-live.bbclass or image-vm.bbclass)
diff --git a/meta/conf/distro/include/distro_alias.inc b/meta/conf/distro/include/distro_alias.inc
index a59265a..489f5ea 100644
--- a/meta/conf/distro/include/distro_alias.inc
+++ b/meta/conf/distro/include/distro_alias.inc
@@ -135,7 +135,7 @@ DISTRO_PN_ALIAS_pn-gtk-doc = "Fedora=gtk-doc Ubuntu=gtk-doc"
DISTRO_PN_ALIAS_pn-gtk-engines = "Fedora=gtk2-engines OpenSuSE=gtk2-engines Ubuntu=gtk2-engines Mandriva=gtk-engines2 Debian=gtk2-engines"
DISTRO_PN_ALIAS_pn-gtk-sato-engine = "OpenedHand"
DISTRO_PN_ALIAS_pn-gtk-icon-utils-native = "OSPDT"
-DISTRO_PN_ALIAS_pn-gummiboot = "Debian=gummiboot Fedora=gummiboot"
+DISTRO_PN_ALIAS_pn-systemd-boot = "Ubuntu=systemd-boot Fedora=systemd-boot"
DISTRO_PN_ALIAS_pn-hello-mod = "OE-Core"
DISTRO_PN_ALIAS_pn-hostap-conf = "OE-Core"
DISTRO_PN_ALIAS_pn-hwlatdetect = "OSPDT"
diff --git a/meta/lib/oeqa/controllers/masterimage.py b/meta/lib/oeqa/controllers/masterimage.py
index d796fc3..07418fc 100644
--- a/meta/lib/oeqa/controllers/masterimage.py
+++ b/meta/lib/oeqa/controllers/masterimage.py
@@ -159,10 +159,10 @@ class MasterImageHardwareTarget(oeqa.targetcontrol.BaseTarget, metaclass=ABCMeta
self.power_cycle(self.connection)
-class GummibootTarget(MasterImageHardwareTarget):
+class SystemdbootTarget(MasterImageHardwareTarget):
def __init__(self, d):
- super(GummibootTarget, self).__init__(d)
+ super(SystemdbootTarget, self).__init__(d)
# this the value we need to set in the LoaderEntryOneShot EFI variable
# so the system boots the 'test' bootloader label and not the default
# The first four bytes are EFI bits, and the rest is an utf-16le string
diff --git a/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb b/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb
index 7036664..602052c 100644
--- a/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb
+++ b/meta/recipes-bsp/systemd-boot/systemd-boot_232.bb
@@ -15,7 +15,7 @@ EXTRA_OECONF = " --enable-gnuefi \
--disable-manpages \
"
-# Imported from gummiboot recipe
+# Imported from the old gummiboot recipe
TUNE_CCARGS_remove = "-mfpmath=sse"
COMPATIBLE_HOST = "(x86_64.*|i.86.*)-linux"
diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh b/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
index b562109..9c4b263 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi-testfs.sh
@@ -171,19 +171,19 @@ if [ -f /run/media/$1/EFI/BOOT/grub.cfg ]; then
fi
if [ -d /run/media/$1/loader ]; then
- GUMMIBOOT_CFGS="/ssd/loader/entries/*.conf"
- # copy config files for gummiboot
+ SYSTEMDBOOT_CFGS="/ssd/loader/entries/*.conf"
+ # copy config files for systemd-boot
cp -dr /run/media/$1/loader /ssd
# delete the install entry
rm -f /ssd/loader/entries/install.conf
# delete the initrd lines
- sed -i "/initrd /d" $GUMMIBOOT_CFGS
+ sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
# delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# delete any root= strings
- sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# add the root= and other standard boot options
- sed -i "s at options *@options root=$rootfs rw $rootwait quiet @" $GUMMIBOOT_CFGS
+ sed -i "s at options *@options root=$rootfs rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
# Add the test label
echo -ne "title test\nlinux /test-kernel\noptions root=$testfs rw $rootwait quiet\n" > /ssd/loader/entries/test.conf
fi
diff --git a/meta/recipes-core/initrdscripts/files/init-install-efi.sh b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
index ffb709c..5ad3a60 100644
--- a/meta/recipes-core/initrdscripts/files/init-install-efi.sh
+++ b/meta/recipes-core/initrdscripts/files/init-install-efi.sh
@@ -245,19 +245,19 @@ fi
if [ -d /run/media/$1/loader ]; then
rootuuid=$(blkid -o value -s PARTUUID ${rootfs})
- GUMMIBOOT_CFGS="/boot/loader/entries/*.conf"
- # copy config files for gummiboot
+ SYSTEMDBOOT_CFGS="/boot/loader/entries/*.conf"
+ # copy config files for systemd-boot
cp -dr /run/media/$1/loader /boot
# delete the install entry
rm -f /boot/loader/entries/install.conf
# delete the initrd lines
- sed -i "/initrd /d" $GUMMIBOOT_CFGS
+ sed -i "/initrd /d" $SYSTEMDBOOT_CFGS
# delete any LABEL= strings
- sed -i "s/ LABEL=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ LABEL=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# delete any root= strings
- sed -i "s/ root=[^ ]*/ /" $GUMMIBOOT_CFGS
+ sed -i "s/ root=[^ ]*/ /" $SYSTEMDBOOT_CFGS
# add the root= and other standard boot options
- sed -i "s at options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $GUMMIBOOT_CFGS
+ sed -i "s at options *@options root=PARTUUID=$rootuuid rw $rootwait quiet @" $SYSTEMDBOOT_CFGS
fi
umount /tgt_root
diff --git a/scripts/contrib/mkefidisk.sh b/scripts/contrib/mkefidisk.sh
index a175895..800733f 100755
--- a/scripts/contrib/mkefidisk.sh
+++ b/scripts/contrib/mkefidisk.sh
@@ -384,7 +384,7 @@ EFIDIR="$BOOTFS_MNT/EFI/BOOT"
cp $HDDIMG_MNT/vmlinuz $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy vmlinuz"
# Copy the efi loader and configs (booti*.efi and grub.cfg if it exists)
cp -r $HDDIMG_MNT/EFI $BOOTFS_MNT >$OUT 2>&1 || error "Failed to copy EFI dir"
-# Silently ignore a missing gummiboot loader dir (we might just be a GRUB image)
+# Silently ignore a missing systemd-boot loader dir (we might just be a GRUB image)
cp -r $HDDIMG_MNT/loader $BOOTFS_MNT >$OUT 2>&1
# Update the boot loaders configurations for an installed image
@@ -410,25 +410,25 @@ if [ -e "$GRUB_CFG" ]; then
sed -i "s at vmlinuz @vmlinuz root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GRUB_CFG
fi
-# Look for a gummiboot installation
-GUMMI_ENTRIES="$BOOTFS_MNT/loader/entries"
-GUMMI_CFG="$GUMMI_ENTRIES/boot.conf"
-if [ -d "$GUMMI_ENTRIES" ]; then
- info "Configuring Gummiboot"
+# Look for a systemd-boot installation
+SYSTEMD_BOOT_ENTRIES="$BOOTFS_MNT/loader/entries"
+SYSTEMD_BOOT_CFG="$SYSTEMD_BOOT_ENTRIES/boot.conf"
+if [ -d "$SYSTEMD_BOOT_ENTRIES" ]; then
+ info "Configuring SystemD-boot"
# remove the install target if it exists
- rm $GUMMI_ENTRIES/install.conf >$OUT 2>&1
+ rm $SYSTEMD_BOOT_ENTRIES/install.conf >$OUT 2>&1
- if [ ! -e "$GUMMI_CFG" ]; then
- echo "ERROR: $GUMMI_CFG not found"
+ if [ ! -e "$SYSTEMD_BOOT_CFG" ]; then
+ echo "ERROR: $SYSTEMD_BOOT_CFG not found"
fi
- sed -i "/initrd /d" $GUMMI_CFG
- sed -i "s@ root=[^ ]*@ @" $GUMMI_CFG
- sed -i "s at options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $GUMMI_CFG
+ sed -i "/initrd /d" $SYSTEMD_BOOT_CFG
+ sed -i "s@ root=[^ ]*@ @" $SYSTEMD_BOOT_CFG
+ sed -i "s at options *LABEL=boot @options LABEL=Boot root=$TARGET_ROOTFS ro rootwait console=ttyS0 console=tty0 @" $SYSTEMD_BOOT_CFG
fi
# Ensure we have at least one EFI bootloader configured
-if [ ! -e $GRUB_CFG ] && [ ! -e $GUMMI_CFG ]; then
+if [ ! -e $GRUB_CFG ] && [ ! -e $SYSTEMD_BOOT_CFG ]; then
die "No EFI bootloader configuration found"
fi
diff --git a/scripts/lib/wic/plugins/source/bootimg-efi.py b/scripts/lib/wic/plugins/source/bootimg-efi.py
index 4adb80b..305e910 100644
--- a/scripts/lib/wic/plugins/source/bootimg-efi.py
+++ b/scripts/lib/wic/plugins/source/bootimg-efi.py
@@ -36,7 +36,7 @@ from wic.utils.oe.misc import exec_cmd, exec_native_cmd, get_bitbake_var, \
class BootimgEFIPlugin(SourcePlugin):
"""
Create EFI boot partition.
- This plugin supports GRUB 2 and gummiboot bootloaders.
+ This plugin supports GRUB 2 and systemd-boot bootloaders.
"""
name = 'bootimg-efi'
@@ -82,7 +82,7 @@ class BootimgEFIPlugin(SourcePlugin):
cfg.close()
@classmethod
- def do_configure_gummiboot(cls, hdddir, creator, cr_workdir):
+ def do_configure_systemdboot(cls, hdddir, creator, cr_workdir):
"""
Create loader-specific systemd-boot/gummiboot config
"""
@@ -98,7 +98,7 @@ class BootimgEFIPlugin(SourcePlugin):
loader_conf += "default boot\n"
loader_conf += "timeout %d\n" % bootloader.timeout
- msger.debug("Writing gummiboot config %s/hdd/boot/loader/loader.conf" \
+ msger.debug("Writing systemd-boot config %s/hdd/boot/loader/loader.conf" \
% cr_workdir)
cfg = open("%s/hdd/boot/loader/loader.conf" % cr_workdir, "w")
cfg.write(loader_conf)
@@ -109,16 +109,16 @@ class BootimgEFIPlugin(SourcePlugin):
if configfile:
custom_cfg = get_custom_config(configfile)
if custom_cfg:
- # Use a custom configuration for gummiboot
+ # Use a custom configuration for systemd-boot
boot_conf = custom_cfg
msger.debug("Using custom configuration file "
- "%s for gummiboots's boot.conf" % configfile)
+ "%s for systemd-boots's boot.conf" % configfile)
else:
msger.error("configfile is specified but failed to "
"get it from %s." % configfile)
if not custom_cfg:
- # Create gummiboot configuration using parameters from wks file
+ # Create systemd-boot configuration using parameters from wks file
kernel = "/bzImage"
boot_conf = ""
@@ -127,7 +127,7 @@ class BootimgEFIPlugin(SourcePlugin):
boot_conf += "options LABEL=Boot root=%s %s\n" % \
(creator.rootdev, bootloader.append)
- msger.debug("Writing gummiboot config %s/hdd/boot/loader/entries/boot.conf" \
+ msger.debug("Writing systemd-boot config %s/hdd/boot/loader/entries/boot.conf" \
% cr_workdir)
cfg = open("%s/hdd/boot/loader/entries/boot.conf" % cr_workdir, "w")
cfg.write(boot_conf)
@@ -149,9 +149,8 @@ class BootimgEFIPlugin(SourcePlugin):
try:
if source_params['loader'] == 'grub-efi':
cls.do_configure_grubefi(hdddir, creator, cr_workdir)
- elif source_params['loader'] == 'gummiboot' \
- or source_params['loader'] == 'systemd-boot':
- cls.do_configure_gummiboot(hdddir, creator, cr_workdir)
+ elif source_params['loader'] == 'systemd-boot':
+ cls.do_configure_systemdboot(hdddir, creator, cr_workdir)
else:
msger.error("unrecognized bootimg-efi loader: %s" % source_params['loader'])
except KeyError:
@@ -190,8 +189,7 @@ class BootimgEFIPlugin(SourcePlugin):
exec_cmd(cp_cmd, True)
shutil.move("%s/grub.cfg" % cr_workdir,
"%s/hdd/boot/EFI/BOOT/grub.cfg" % cr_workdir)
- elif source_params['loader'] == 'gummiboot' \
- or source_params['loader'] == 'systemd-boot':
+ elif source_params['loader'] == 'systemd-boot':
cp_cmd = "cp %s/EFI/BOOT/* %s/EFI/BOOT" % (bootimg_dir, hdddir)
exec_cmd(cp_cmd, True)
else:
--
2.10.1
More information about the Openembedded-core
mailing list