[OE-core] [PATCH v2 1/1] Make yocto-spdx support spdx2.0 SPEC
Lei, Maohui
leimaohui at cn.fujitsu.com
Thu Nov 3 04:02:42 UTC 2016
Ping.
> -----Original Message-----
> From: openembedded-core-bounces at lists.openembedded.org [mailto:openembedded-
> core-bounces at lists.openembedded.org] On Behalf Of Lei, Maohui
> Sent: Monday, October 17, 2016 9:04 AM
> To: Maxin B. John; Jan-Simon Möller
> Cc: jsmoeller at linuxfoundation.org; openembedded-core at lists.openembedded.org
> Subject: Re: [OE-core] [PATCH v2 1/1] Make yocto-spdx support spdx2.0 SPEC
>
> Hi Maxin, Simon
>
> > > Instead of requesting the user to install the DoSOCSv2 from github
> > > or other repos, can we make the spdx.bbclass depend on "dosocs-native"
> > or
> > > similar and make that "DoSOCSv2" recipe available in oe-core ?
> >
> > That's a good idea. I will try.
>
> I tried to make DoSOCSv2 recipe to oe-core, and find that there are at least
> the following direct dependencies that not belong to oe-core.
>
> PostgreSQL
> python-psycopg2
> jinja2
> python-magic
> docopt
> SQLAlchemy
> psycopg2
>
> I think it difficult to add them all into oe-core and it's the reason that why
> the original spdx module didn't add fossology into oe-core.
>
>
>
> Best regards
> Lei
>
>
> > -----Original Message-----
> > From: openembedded-core-bounces at lists.openembedded.org
> > [mailto:openembedded-core-bounces at lists.openembedded.org] On Behalf Of
> > Lei, Maohui
> > Sent: Thursday, September 22, 2016 10:19 AM
> > To: Maxin B. John; Jan-Simon Möller
> > Cc: jsmoeller at linuxfoundation.org; openembedded-
> > core at lists.openembedded.org
> > Subject: Re: [OE-core] [PATCH v2 1/1] Make yocto-spdx support spdx2.0
> > SPEC
> >
> > Hi Maxin, Simon
> >
> > > It would be nice to include the reason for change from fossology to
> > > dosocs2 in the commit message too (from cover letter)
> >
> > OK, I will add the reasons into the commit message in v3.
> >
> > > Instead of requesting the user to install the DoSOCSv2 from github
> > > or other repos, can we make the spdx.bbclass depend on "dosocs-native"
> > or
> > > similar and make that "DoSOCSv2" recipe available in oe-core ?
> >
> > That's a good idea. I will try.
> >
> >
> > Best Regards
> > Lei
> >
> >
> > > -----Original Message-----
> > > From: Maxin B. John [mailto:maxin.john at intel.com]
> > > Sent: Monday, September 19, 2016 6:58 PM
> > > To: Lei, Maohui
> > > Cc: openembedded-core at lists.openembedded.org;
> > > jsmoeller at linuxfoundation.org
> > > Subject: Re: [OE-core] [PATCH v2 1/1] Make yocto-spdx support
> > > spdx2.0 SPEC
> > >
> > > Hi,
> > >
> > > Please find my comments below:
> > >
> > > On Mon, Sep 19, 2016 at 04:39:50PM +0800, Lei Maohui wrote:
> > > > More:
> > > > - change spdx tool from fossology to dosocs2
> > >
> > > It would be nice to include the reason for change from fossology to
> > > dosocs2 in the commit message too (from cover letter)
> > >
> > > > Signed-off-by: Lei Maohui <leimaohui at cn.fujitsu.com>
> > > > ---
> > > > meta/classes/spdx.bbclass | 505
> > > > ++++++++++++++++++------------------
> > > ----------
> > > > meta/conf/licenses.conf | 67 +-----
> > > > 2 files changed, 198 insertions(+), 374 deletions(-)
> > > >
> > > > diff --git a/meta/classes/spdx.bbclass b/meta/classes/spdx.bbclass
> > > > index 0c92765..27c0fa0 100644
> > > > --- a/meta/classes/spdx.bbclass
> > > > +++ b/meta/classes/spdx.bbclass
> > > > @@ -1,365 +1,252 @@
> > > > # This class integrates real-time license scanning, generation of
> > > > SPDX standard # output and verifiying license info during the
> > > building process.
> > > > -# It is a combination of efforts from the OE-Core, SPDX and
> > > Fossology projects.
> > > > +# It is a combination of efforts from the OE-Core, SPDX and
> > > > +DoSOCSv2
> > > projects.
> > > > #
> > > > -# For more information on FOSSology:
> > > > -# http://www.fossology.org
> > > > -#
> > > > -# For more information on FOSSologySPDX commandline:
> > > > -# https://github.com/spdx-tools/fossology-spdx/wiki/Fossology-
> > > SPDX-Web-API
> > > > +# For more information on DoSOCSv2:
> > > > +# https://github.com/DoSOCSv2
> > >
> > > Instead of requesting the user to install the DoSOCSv2 from github
> > > or other repos, can we make the spdx.bbclass depend on "dosocs-native"
> > or
> > > similar and make that "DoSOCSv2" recipe available in oe-core ?
> > >
> > > That might make it easy to use this class.
> > >
> > > > # For more information on SPDX:
> > > > # http://www.spdx.org
> > > > #
> > > > +# Note:
> > > > +# 1) Make sure DoSOCSv2 has beed installed in your host # 2) By
> > > > +default,spdx files will be output to the path which is defined
> > > as[SPDX_MANIFEST_DIR]
> > > > +# in ./meta/conf/licenses.conf.
> > > >
> > > > -# SPDX file will be output to the path which is defined
> > > > as[SPDX_MANIFEST_DIR] -# in ./meta/conf/licenses.conf.
> > > > +SPDXOUTPUTDIR = "${WORKDIR}/spdx_output_dir"
> > > > SPDXSSTATEDIR = "${WORKDIR}/spdx_sstate_dir"
> > > >
> > > > # If ${S} isn't actually the top-level source directory, set
> > SPDX_S
> > > > to point at # the real top-level directory.
> > > > +
> > > > SPDX_S ?= "${S}"
> > > >
> > > > python do_spdx () {
> > > > import os, sys
> > > > - import json, shutil
> > > > -
> > > > - info = {}
> > > > - info['workdir'] = d.getVar('WORKDIR', True)
> > > > - info['sourcedir'] = d.getVar('SPDX_S', True)
> > > > - info['pn'] = d.getVar('PN', True)
> > > > - info['pv'] = d.getVar('PV', True)
> > > > - info['spdx_version'] = d.getVar('SPDX_VERSION', True)
> > > > - info['data_license'] = d.getVar('DATA_LICENSE', True)
> > > > -
> > > > - sstatedir = d.getVar('SPDXSSTATEDIR', True)
> > > > - sstatefile = os.path.join(sstatedir, info['pn'] + info['pv'] +
> > > ".spdx")
> > > > + import json
> > > >
> > > > - manifest_dir = d.getVar('SPDX_MANIFEST_DIR', True)
> > > > - info['outfile'] = os.path.join(manifest_dir, info['pn'] +
> > > ".spdx" )
> > > > + ## It's no necessary to get spdx files for *-native
> > > > + if d.getVar('PN', True) == d.getVar('BPN', True) + "-native":
> > > > + return None
> > > >
> > > > - info['spdx_temp_dir'] = d.getVar('SPDX_TEMP_DIR', True)
> > > > - info['tar_file'] = os.path.join(info['workdir'], info['pn'] +
> > > ".tar.gz" )
> > > > + ## gcc is too big to get spdx file.
> > > > + if 'gcc' in d.getVar('PN', True):
> > > > + return None
> > > >
> > > > - # Make sure important dirs exist
> > > > - try:
> > > > - bb.utils.mkdirhier(manifest_dir)
> > > > - bb.utils.mkdirhier(sstatedir)
> > > > - bb.utils.mkdirhier(info['spdx_temp_dir'])
> > > > - except OSError as e:
> > > > - bb.error("SPDX: Could not set up required directories: " +
> > > str(e))
> > > > - return
> > > > + info = {}
> > > > + info['workdir'] = (d.getVar('WORKDIR', True) or "")
> > > > + info['pn'] = (d.getVar( 'PN', True ) or "")
> > > > + info['pv'] = (d.getVar( 'PV', True ) or "")
> > > > + info['package_download_location'] = (d.getVar( 'SRC_URI',
> > > > + True
> > > > + )
> > > or "")
> > > > + if info['package_download_location'] != "":
> > > > + info['package_download_location'] =
> > > info['package_download_location'].split()[0]
> > > > + info['spdx_version'] = (d.getVar('SPDX_VERSION', True) or '')
> > > > + info['data_license'] = (d.getVar('DATA_LICENSE', True) or '')
> > > > + info['creator'] = {}
> > > > + info['creator']['Tool'] = (d.getVar('CREATOR_TOOL', True) or
> > '')
> > > > + info['license_list_version'] =
> > > > + (d.getVar('LICENSELISTVERSION',
> > > True) or '')
> > > > + info['package_homepage'] = (d.getVar('HOMEPAGE', True) or "")
> > > > + info['package_summary'] = (d.getVar('SUMMARY', True) or "")
> > > > + info['package_summary'] =
> > > info['package_summary'].replace("\n","")
> > > > + info['package_summary'] =
> > info['package_summary'].replace("'","
> > > > + ")
> > > > +
> > > > + spdx_sstate_dir = (d.getVar('SPDXSSTATEDIR', True) or "")
> > > > + manifest_dir = (d.getVar('SPDX_MANIFEST_DIR', True) or "")
> > > > + info['outfile'] = os.path.join(manifest_dir, info['pn'] + "-"
> > +
> > > info['pv'] + ".spdx" )
> > > > + sstatefile = os.path.join(spdx_sstate_dir,
> > > > + info['pn'] + "-" + info['pv'] + ".spdx" )
> > > >
> > > > ## get everything from cache. use it to decide if
> > > > - ## something needs to be rerun
> > > > - cur_ver_code = get_ver_code(info['sourcedir'])
> > > > + ## something needs to be rerun
> > > > + if not os.path.exists( spdx_sstate_dir ):
> > > > + bb.utils.mkdirhier( spdx_sstate_dir )
> > > > +
> > > > + d.setVar('WORKDIR', d.getVar('SPDX_TEMP_DIR', True))
> > > > + info['sourcedir'] = (d.getVar('SPDX_S', True) or "")
> > > > + cur_ver_code = get_ver_code( info['sourcedir'] ).split()[0]
> > > > cache_cur = False
> > > > - if os.path.exists(sstatefile):
> > > > + if os.path.exists( sstatefile ):
> > > > ## cache for this package exists. read it in
> > > > - cached_spdx = get_cached_spdx(sstatefile)
> > > > -
> > > > - if cached_spdx['PackageVerificationCode'] == cur_ver_code:
> > > > - bb.warn("SPDX: Verification code for " + info['pn']
> > > > - + "is same as cache's. do nothing")
> > > > + cached_spdx = get_cached_spdx( sstatefile )
> > > > + if cached_spdx:
> > > > + cached_spdx = cached_spdx.split()[0]
> > > > + if (cached_spdx == cur_ver_code):
> > > > + bb.warn(info['pn'] + "'s ver code same as cache's. do
> > > > + nothing")
> > > > cache_cur = True
> > > > + create_manifest(info,sstatefile)
> > > > + if not cache_cur:
> > > > + ## setup dosocs2 command
> > > > + dosocs2_command = "dosocs2 oneshot %s" % info['sourcedir']
> > > > + ## no necessary to scan the git directory.
> > > > + git_path = "%s/.git" % info['sourcedir']
> > > > + if os.path.exists(git_path):
> > > > + remove_dir_tree(git_path)
> > > > +
> > > > + ## Get spdx file
> > > > + run_dosocs2(dosocs2_command,sstatefile)
> > > > + if get_cached_spdx( sstatefile ) != None:
> > > > + write_cached_spdx( info,sstatefile,cur_ver_code )
> > > > + ## CREATE MANIFEST(write to outfile )
> > > > + create_manifest(info,sstatefile)
> > > > else:
> > > > - local_file_info = setup_foss_scan(info, True,
> > > cached_spdx['Files'])
> > > > - else:
> > > > - local_file_info = setup_foss_scan(info, False, None)
> > > > -
> > > > - if cache_cur:
> > > > - spdx_file_info = cached_spdx['Files']
> > > > - foss_package_info = cached_spdx['Package']
> > > > - foss_license_info = cached_spdx['Licenses']
> > > > - else:
> > > > - ## setup fossology command
> > > > - foss_server = d.getVar('FOSS_SERVER', True)
> > > > - foss_flags = d.getVar('FOSS_WGET_FLAGS', True)
> > > > - foss_full_spdx = d.getVar('FOSS_FULL_SPDX', True) ==
> > "true"
> > > or False
> > > > - foss_command = "wget %s --post-file=%s %s"\
> > > > - % (foss_flags, info['tar_file'], foss_server)
> > > > -
> > > > - foss_result = run_fossology(foss_command, foss_full_spdx)
> > > > - if foss_result is not None:
> > > > - (foss_package_info, foss_file_info, foss_license_info)
> > =
> > > foss_result
> > > > - spdx_file_info = create_spdx_doc(local_file_info,
> > > foss_file_info)
> > > > - ## write to cache
> > > > - write_cached_spdx(sstatefile, cur_ver_code,
> > > foss_package_info,
> > > > - spdx_file_info, foss_license_info)
> > > > - else:
> > > > - bb.error("SPDX: Could not communicate with FOSSology
> > > server. Command was: " + foss_command)
> > > > - return
> > > > -
> > > > - ## Get document and package level information
> > > > - spdx_header_info = get_header_info(info, cur_ver_code,
> > > foss_package_info)
> > > > + bb.warn('Can\'t get the spdx file ' + info['pn'] + '.
> > > Please check your dosocs2.')
> > > > + d.setVar('WORKDIR', info['workdir']) } ## Get the src after
> > > > +do_patch.
> > > > +python do_get_spdx_s() {
> > > >
> > > > - ## CREATE MANIFEST
> > > > - create_manifest(info, spdx_header_info, spdx_file_info,
> > > foss_license_info)
> > > > + ## It's no necessary to get spdx files for *-native
> > > > + if d.getVar('PN', True) == d.getVar('BPN', True) + "-native":
> > > > + return None
> > > >
> > > > - ## clean up the temp stuff
> > > > - shutil.rmtree(info['spdx_temp_dir'], ignore_errors=True)
> > > > - if os.path.exists(info['tar_file']):
> > > > - remove_file(info['tar_file'])
> > > > + ## gcc is too big to get spdx file.
> > > > + if 'gcc' in d.getVar('PN', True):
> > > > + return None
> > > > +
> > > > + ## Change the WORKDIR to make do_unpack do_patch run in
> > another
> > > dir.
> > > > + d.setVar('WORKDIR', d.getVar('SPDX_TEMP_DIR', True))
> > > > + ## The changed 'WORKDIR' also casued 'B' changed, create dir
> > 'B'
> > > for the
> > > > + ## possibly requiring of the following tasks (such as some
> > > recipes's
> > > > + ## do_patch required 'B' existed).
> > > > + bb.utils.mkdirhier(d.getVar('B', True))
> > > > +
> > > > + ## The kernel source is ready after do_validate_branches
> > > > + if bb.data.inherits_class('kernel-yocto', d):
> > > > + bb.build.exec_func('do_unpack', d)
> > > > + bb.build.exec_func('do_kernel_checkout', d)
> > > > + bb.build.exec_func('do_validate_branches', d)
> > > > + else:
> > > > + bb.build.exec_func('do_unpack', d)
> > > > + ## The S of the gcc source is work-share
> > > > + flag = d.getVarFlag('do_unpack', 'stamp-base', True)
> > > > + if flag:
> > > > + d.setVar('S', d.getVar('WORKDIR', True) + "/gcc-" +
> > > d.getVar('PV', True))
> > > > + bb.build.exec_func('do_patch', d)
> > > > }
> > > > -addtask spdx after do_patch before do_configure
> > > > -
> > > > -def create_manifest(info, header, files, licenses):
> > > > - import codecs
> > > > - with codecs.open(info['outfile'], mode='w', encoding='utf-8')
> > as
> > > f:
> > > > - # Write header
> > > > - f.write(header + '\n')
> > > > -
> > > > - # Write file data
> > > > - for chksum, block in files.iteritems():
> > > > - f.write("FileName: " + block['FileName'] + '\n')
> > > > - for key, value in block.iteritems():
> > > > - if not key == 'FileName':
> > > > - f.write(key + ": " + value + '\n')
> > > > - f.write('\n')
> > > > -
> > > > - # Write license data
> > > > - for id, block in licenses.iteritems():
> > > > - f.write("LicenseID: " + id + '\n')
> > > > - for key, value in block.iteritems():
> > > > - f.write(key + ": " + value + '\n')
> > > > - f.write('\n')
> > > > -
> > > > -def get_cached_spdx(sstatefile):
> > > > - import json
> > > > - import codecs
> > > > - cached_spdx_info = {}
> > > > - with codecs.open(sstatefile, mode='r', encoding='utf-8') as f:
> > > > - try:
> > > > - cached_spdx_info = json.load(f)
> > > > - except ValueError as e:
> > > > - cached_spdx_info = None
> > > > - return cached_spdx_info
> > > >
> > > > -def write_cached_spdx(sstatefile, ver_code, package_info, files,
> > > license_info):
> > > > - import json
> > > > - import codecs
> > > > - spdx_doc = {}
> > > > - spdx_doc['PackageVerificationCode'] = ver_code
> > > > - spdx_doc['Files'] = {}
> > > > - spdx_doc['Files'] = files
> > > > - spdx_doc['Package'] = {}
> > > > - spdx_doc['Package'] = package_info
> > > > - spdx_doc['Licenses'] = {}
> > > > - spdx_doc['Licenses'] = license_info
> > > > - with codecs.open(sstatefile, mode='w', encoding='utf-8') as f:
> > > > - f.write(json.dumps(spdx_doc))
> > > > -
> > > > -def setup_foss_scan(info, cache, cached_files):
> > > > - import errno, shutil
> > > > - import tarfile
> > > > - file_info = {}
> > > > - cache_dict = {}
> > > > -
> > > > - for f_dir, f in list_files(info['sourcedir']):
> > > > - full_path = os.path.join(f_dir, f)
> > > > - abs_path = os.path.join(info['sourcedir'], full_path)
> > > > - dest_dir = os.path.join(info['spdx_temp_dir'], f_dir)
> > > > - dest_path = os.path.join(info['spdx_temp_dir'], full_path)
> > > > -
> > > > - checksum = hash_file(abs_path)
> > > > - if not checksum is None:
> > > > - file_info[checksum] = {}
> > > > - ## retain cache information if it exists
> > > > - if cache and checksum in cached_files:
> > > > - file_info[checksum] = cached_files[checksum]
> > > > - ## have the file included in what's sent to the
> > > FOSSology server
> > > > - else:
> > > > - file_info[checksum]['FileName'] = full_path
> > > > - try:
> > > > - bb.utils.mkdirhier(dest_dir)
> > > > - shutil.copyfile(abs_path, dest_path)
> > > > - except OSError as e:
> > > > - bb.warn("SPDX: mkdirhier failed: " + str(e))
> > > > - except shutil.Error as e:
> > > > - bb.warn("SPDX: copyfile failed: " + str(e))
> > > > - except IOError as e:
> > > > - bb.warn("SPDX: copyfile failed: " + str(e))
> > > > - else:
> > > > - bb.warn("SPDX: Could not get checksum for file: " + f)
> > > > +addtask get_spdx_s after do_patch before do_configure addtask
> > > > +spdx after do_get_spdx_s before do_configure
> > > > +
> > > > +def create_manifest(info,sstatefile):
> > > > + import shutil
> > > > + shutil.copyfile(sstatefile,info['outfile'])
> > > > +
> > > > +def get_cached_spdx( sstatefile ):
> > > > + import subprocess
> > > > +
> > > > + if not os.path.exists( sstatefile ):
> > > > + return None
> > > >
> > > > - with tarfile.open(info['tar_file'], "w:gz") as tar:
> > > > - tar.add(info['spdx_temp_dir'],
> > > arcname=os.path.basename(info['spdx_temp_dir']))
> > > > + try:
> > > > + output = subprocess.check_output(['grep',
> > > "PackageVerificationCode", sstatefile])
> > > > + except subprocess.CalledProcessError as e:
> > > > + bb.error("Index creation command '%s' failed with return
> > > code %d:\n%s" % (e.cmd, e.returncode, e.output))
> > > > + return None
> > > > + cached_spdx_info=output.decode('utf-8').split(': ')
> > > > + return cached_spdx_info[1]
> > > > +
> > > > +## Add necessary information into spdx file def
> > > > +write_cached_spdx( info,sstatefile, ver_code ):
> > > > + import subprocess
> > > > +
> > > > + def sed_replace(dest_sed_cmd,key_word,replace_info):
> > > > + dest_sed_cmd = dest_sed_cmd + "-e 's#^" + key_word + ".*#"
> > > > + +
> > > \
> > > > + key_word + replace_info + "#' "
> > > > + return dest_sed_cmd
> > > > +
> > > > + def sed_insert(dest_sed_cmd,key_word,new_line):
> > > > + dest_sed_cmd = dest_sed_cmd + "-e '/^" + key_word \
> > > > + + r"/a\\" + new_line + "' "
> > > > + return dest_sed_cmd
> > > > +
> > > > + ## Document level information
> > > > + sed_cmd = r"sed -i -e 's#\r$##g' "
> > > > + spdx_DocumentComment = "<text>SPDX for " + info['pn'] + "
> > > version " \
> > > > + + info['pv'] + "</text>"
> > > > + sed_cmd =
> > > > + sed_replace(sed_cmd,"DocumentComment",spdx_DocumentComment)
> > > >
> > > > - return file_info
> > > > + ## Creator information
> > > > + sed_cmd = sed_insert(sed_cmd,"CreatorComment:
> > > > + ","LicenseListVersion: " + info['license_list_version'])
> > > > +
> > > > + ## Package level information
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageName: ",info['pn'])
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageVersion: ",info['pv'])
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageDownloadLocation:
> > > ",info['package_download_location'])
> > > > + sed_cmd = sed_insert(sed_cmd,"PackageChecksum:
> > > ","PackageHomePage: " + info['package_homepage'])
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageSummary: ","<text>" +
> > > info['package_summary'] + "</text>")
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageVerificationCode:
> > > ",ver_code)
> > > > + sed_cmd = sed_replace(sed_cmd,"PackageDescription: ",
> > > > + "<text>" + info['pn'] + " version " + info['pv'] +
> > "</text>")
> > > > + sed_cmd = sed_cmd + sstatefile
> > > > +
> > > > + subprocess.call("%s" % sed_cmd, shell=True)
> > > > +
> > > > +def remove_dir_tree( dir_name ):
> > > > + import shutil
> > > > + try:
> > > > + shutil.rmtree( dir_name )
> > > > + except:
> > > > + pass
> > > >
> > > > -def remove_file(file_name):
> > > > +def remove_file( file_name ):
> > > > try:
> > > > - os.remove(file_name)
> > > > + os.remove( file_name )
> > > > except OSError as e:
> > > > pass
> > > >
> > > > -def list_files(dir):
> > > > - for root, subFolders, files in os.walk(dir):
> > > > +def list_files( dir ):
> > > > + for root, subFolders, files in os.walk( dir ):
> > > > for f in files:
> > > > - rel_root = os.path.relpath(root, dir)
> > > > + rel_root = os.path.relpath( root, dir )
> > > > yield rel_root, f
> > > > return
> > > >
> > > > -def hash_file(file_name):
> > > > +def hash_file( file_name ):
> > > > + """
> > > > + Return the hex string representation of the SHA1 checksum of
> > > > +the
> > > filename
> > > > + """
> > > > try:
> > > > - with open(file_name, 'rb') as f:
> > > > - data_string = f.read()
> > > > - sha1 = hash_string(data_string)
> > > > - return sha1
> > > > - except:
> > > > + import hashlib
> > > > + except ImportError:
> > > > return None
> > > > +
> > > > + sha1 = hashlib.sha1()
> > > > + with open( file_name, "rb" ) as f:
> > > > + for line in f:
> > > > + sha1.update(line)
> > > > + return sha1.hexdigest()
> > > >
> > > > -def hash_string(data):
> > > > +def hash_string( data ):
> > > > import hashlib
> > > > sha1 = hashlib.sha1()
> > > > - sha1.update(data)
> > > > + sha1.update( data.encode('utf-8') )
> > > > return sha1.hexdigest()
> > > >
> > > > -def run_fossology(foss_command, full_spdx):
> > > > +def run_dosocs2( dosocs2_command, spdx_file ):
> > > > + import subprocess, codecs
> > > > import string, re
> > > > - import subprocess
> > > > -
> > > > - p = subprocess.Popen(foss_command.split(),
> > > > +
> > > > + p = subprocess.Popen(dosocs2_command.split(),
> > > > stdout=subprocess.PIPE, stderr=subprocess.PIPE)
> > > > - foss_output, foss_error = p.communicate()
> > > > + dosocs2_output, dosocs2_error = p.communicate()
> > > > if p.returncode != 0:
> > > > return None
> > > >
> > > > - foss_output = unicode(foss_output, "utf-8")
> > > > - foss_output = string.replace(foss_output, '\r', '')
> > > > -
> > > > - # Package info
> > > > - package_info = {}
> > > > - if full_spdx:
> > > > - # All mandatory, only one occurrence
> > > > - package_info['PackageCopyrightText'] =
> > > re.findall('PackageCopyrightText: (.*?</text>)', foss_output,
> > > re.S)[0]
> > > > - package_info['PackageLicenseDeclared'] =
> > > re.findall('PackageLicenseDeclared: (.*)', foss_output)[0]
> > > > - package_info['PackageLicenseConcluded'] =
> > > re.findall('PackageLicenseConcluded: (.*)', foss_output)[0]
> > > > - # These may be more than one
> > > > - package_info['PackageLicenseInfoFromFiles'] =
> > > re.findall('PackageLicenseInfoFromFiles: (.*)', foss_output)
> > > > - else:
> > > > - DEFAULT = "NOASSERTION"
> > > > - package_info['PackageCopyrightText'] = "<text>" + DEFAULT
> > +
> > > "</text>"
> > > > - package_info['PackageLicenseDeclared'] = DEFAULT
> > > > - package_info['PackageLicenseConcluded'] = DEFAULT
> > > > - package_info['PackageLicenseInfoFromFiles'] = []
> > > > -
> > > > - # File info
> > > > - file_info = {}
> > > > - records = []
> > > > - # FileName is also in PackageFileName, so we match on FileType
> > > as well.
> > > > - records = re.findall('FileName:.*?FileType:.*?</text>',
> > > foss_output, re.S)
> > > > - for rec in records:
> > > > - chksum = re.findall('FileChecksum: SHA1: (.*)\n', rec)[0]
> > > > - file_info[chksum] = {}
> > > > - file_info[chksum]['FileCopyrightText'] =
> > > re.findall('FileCopyrightText: '
> > > > - + '(.*?</text>)', rec, re.S )[0]
> > > > - fields = ['FileName', 'FileType', 'LicenseConcluded',
> > > 'LicenseInfoInFile']
> > > > - for field in fields:
> > > > - file_info[chksum][field] = re.findall(field + ': (.*)',
> > > rec)[0]
> > > > -
> > > > - # Licenses
> > > > - license_info = {}
> > > > - licenses = []
> > > > - licenses = re.findall('LicenseID:.*?LicenseName:.*?\n',
> > > foss_output, re.S)
> > > > - for lic in licenses:
> > > > - license_id = re.findall('LicenseID: (.*)\n', lic)[0]
> > > > - license_info[license_id] = {}
> > > > - license_info[license_id]['ExtractedText'] =
> > > re.findall('ExtractedText: (.*?</text>)', lic, re.S)[0]
> > > > - license_info[license_id]['LicenseName'] =
> > > re.findall('LicenseName: (.*)', lic)[0]
> > > > -
> > > > - return (package_info, file_info, license_info)
> > > > -
> > > > -def create_spdx_doc(file_info, scanned_files):
> > > > - import json
> > > > - ## push foss changes back into cache
> > > > - for chksum, lic_info in scanned_files.iteritems():
> > > > - if chksum in file_info:
> > > > - file_info[chksum]['FileType'] = lic_info['FileType']
> > > > - file_info[chksum]['FileChecksum: SHA1'] = chksum
> > > > - file_info[chksum]['LicenseInfoInFile'] =
> > > lic_info['LicenseInfoInFile']
> > > > - file_info[chksum]['LicenseConcluded'] =
> > > lic_info['LicenseConcluded']
> > > > - file_info[chksum]['FileCopyrightText'] =
> > > lic_info['FileCopyrightText']
> > > > - else:
> > > > - bb.warn("SPDX: " + lic_info['FileName'] + " : " +
> > chksum
> > > > - + " : is not in the local file info: "
> > > > - + json.dumps(lic_info, indent=1))
> > > > - return file_info
> > > > + dosocs2_output = dosocs2_output.decode('utf-8')
> > > > +
> > > > + f = codecs.open(spdx_file,'w','utf-8')
> > > > + f.write(dosocs2_output)
> > > >
> > > > -def get_ver_code(dirname):
> > > > +def get_ver_code( dirname ):
> > > > chksums = []
> > > > - for f_dir, f in list_files(dirname):
> > > > - hash = hash_file(os.path.join(dirname, f_dir, f))
> > > > - if not hash is None:
> > > > - chksums.append(hash)
> > > > - else:
> > > > - bb.warn("SPDX: Could not hash file: " + path)
> > > > - ver_code_string = ''.join(chksums).lower()
> > > > - ver_code = hash_string(ver_code_string)
> > > > + for f_dir, f in list_files( dirname ):
> > > > + try:
> > > > + stats = os.stat(os.path.join(dirname,f_dir,f))
> > > > + except OSError as e:
> > > > + bb.warn( "Stat failed" + str(e) + "\n")
> > > > + continue
> > > > + chksums.append(hash_file(os.path.join(dirname,f_dir,f)))
> > > > + ver_code_string = ''.join( chksums ).lower()
> > > > + ver_code = hash_string( ver_code_string )
> > > > return ver_code
> > > >
> > > > -def get_header_info(info, spdx_verification_code, package_info):
> > > > - """
> > > > - Put together the header SPDX information.
> > > > - Eventually this needs to become a lot less
> > > > - of a hardcoded thing.
> > > > - """
> > > > - from datetime import datetime
> > > > - import os
> > > > - head = []
> > > > - DEFAULT = "NOASSERTION"
> > > > -
> > > > - package_checksum = hash_file(info['tar_file'])
> > > > - if package_checksum is None:
> > > > - package_checksum = DEFAULT
> > > > -
> > > > - ## document level information
> > > > - head.append("## SPDX Document Information")
> > > > - head.append("SPDXVersion: " + info['spdx_version'])
> > > > - head.append("DataLicense: " + info['data_license'])
> > > > - head.append("DocumentComment: <text>SPDX for "
> > > > - + info['pn'] + " version " + info['pv'] + "</text>")
> > > > - head.append("")
> > > > -
> > > > - ## Creator information
> > > > - ## Note that this does not give time in UTC.
> > > > - now = datetime.now().strftime('%Y-%m-%dT%H:%M:%SZ')
> > > > - head.append("## Creation Information")
> > > > - ## Tools are supposed to have a version, but FOSSology+SPDX
> > > provides none.
> > > > - head.append("Creator: Tool: FOSSology+SPDX")
> > > > - head.append("Created: " + now)
> > > > - head.append("CreatorComment: <text>UNO</text>")
> > > > - head.append("")
> > > > -
> > > > - ## package level information
> > > > - head.append("## Package Information")
> > > > - head.append("PackageName: " + info['pn'])
> > > > - head.append("PackageVersion: " + info['pv'])
> > > > - head.append("PackageFileName: " +
> > > os.path.basename(info['tar_file']))
> > > > - head.append("PackageSupplier: Person:" + DEFAULT)
> > > > - head.append("PackageDownloadLocation: " + DEFAULT)
> > > > - head.append("PackageSummary: <text></text>")
> > > > - head.append("PackageOriginator: Person:" + DEFAULT)
> > > > - head.append("PackageChecksum: SHA1: " + package_checksum)
> > > > - head.append("PackageVerificationCode: " +
> > spdx_verification_code)
> > > > - head.append("PackageDescription: <text>" + info['pn']
> > > > - + " version " + info['pv'] + "</text>")
> > > > - head.append("")
> > > > - head.append("PackageCopyrightText: "
> > > > - + package_info['PackageCopyrightText'])
> > > > - head.append("")
> > > > - head.append("PackageLicenseDeclared: "
> > > > - + package_info['PackageLicenseDeclared'])
> > > > - head.append("PackageLicenseConcluded: "
> > > > - + package_info['PackageLicenseConcluded'])
> > > > -
> > > > - for licref in package_info['PackageLicenseInfoFromFiles']:
> > > > - head.append("PackageLicenseInfoFromFiles: " + licref)
> > > > - head.append("")
> > > > -
> > > > - ## header for file level
> > > > - head.append("## File Information")
> > > > - head.append("")
> > > > -
> > > > - return '\n'.join(head)
> > > > diff --git a/meta/conf/licenses.conf b/meta/conf/licenses.conf
> > index
> > > > 9917c40..5963e2f 100644
> > > > --- a/meta/conf/licenses.conf
> > > > +++ b/meta/conf/licenses.conf
> > > > @@ -122,68 +122,5 @@ SPDXLICENSEMAP[SGIv1] = "SGI-1"
> > > > #COPY_LIC_DIRS = "1"
> > > >
> > > > ## SPDX temporary directory
> > > > -SPDX_TEMP_DIR = "${WORKDIR}/spdx_temp"
> > > > -SPDX_MANIFEST_DIR = "/home/yocto/fossology_scans"
> > > > -
> > > > -## SPDX Format info
> > > > -SPDX_VERSION = "SPDX-1.1"
> > > > -DATA_LICENSE = "CC0-1.0"
> > > > -
> > > > -## Fossology scan information
> > > > -# You can set option to control if the copyright information will
> > > > be skipped -# during the identification process.
> > > > -#
> > > > -# It is defined as [FOSS_COPYRIGHT] in ./meta/conf/licenses.conf.
> > > > -# FOSS_COPYRIGHT = "true"
> > > > -# NO copyright will be processed. That means only license
> > > information will be
> > > > -# identified and output to SPDX file
> > > > -# FOSS_COPYRIGHT = "false"
> > > > -# Copyright will be identified and output to SPDX file along
> > with
> > > license
> > > > -# information. The process will take more time than not
> > processing
> > > copyright
> > > > -# information.
> > > > -#
> > > > -
> > > > -FOSS_NO_COPYRIGHT = "true"
> > > > -
> > > > -# A option defined as[FOSS_RECURSIVE_UNPACK] in
> > > > ./meta/conf/licenses.conf. is -# used to control if FOSSology
> > server
> > > > need recursively unpack tar.gz file which -# is sent from do_spdx
> > > task.
> > > > -#
> > > > -# FOSS_RECURSIVE_UNPACK = "false":
> > > > -# FOSSology server does NOT recursively unpack. In the current
> > > release, this
> > > > -# is the default choice because recursively unpack will not
> > > necessarily break
> > > > -# down original compressed files.
> > > > -# FOSS_RECURSIVE_UNPACK = "true":
> > > > -# FOSSology server recursively unpack components.
> > > > -#
> > > > -
> > > > -FOSS_RECURSIVE_UNPACK = "false"
> > > > -
> > > > -# An option defined as [FOSS_FULL_SPDX] in
> > > > ./meta/conf/licenses.conf is used to -# control what kind of SPDX
> > > > output to get from the
> > > FOSSology server.
> > > > -#
> > > > -# FOSS_FULL_SPDX = "true":
> > > > -# Tell FOSSology server to return full SPDX output, like if the
> > > program was
> > > > -# run from the command line. This is needed in order to get
> > > license refs for
> > > > -# the full package rather than individual files only.
> > > > -#
> > > > -# FOSS_FULL_SPDX = "false":
> > > > -# Tell FOSSology to only process license information for files.
> > > All package
> > > > -# license tags in the report will be "NOASSERTION"
> > > > -#
> > > > -
> > > > -FOSS_FULL_SPDX = "true"
> > > > -
> > > > -# FOSSologySPDX instance server. http://localhost/repo is the
> > > default
> > > > -# installation location for FOSSology.
> > > > -#
> > > > -# For more information on FOSSologySPDX commandline:
> > > > -# https://github.com/spdx-tools/fossology-spdx/wiki/Fossology-
> > > SPDX-Web-API
> > > > -#
> > > > -
> > > > -FOSS_BASE_URL = "http://localhost/repo/?mod=spdx_license_once"
> > > > -FOSS_SERVER =
> > >
> > "${FOSS_BASE_URL}&fullSPDXFlag=${FOSS_FULL_SPDX}&noCopyright=${FOSS_NO
> > > _ COPYRIGHT}&recursiveUnpack=${FOSS_RECURSIVE_UNPACK}"
> > > > -
> > > > -FOSS_WGET_FLAGS = "-qO - --no-check-certificate --timeout=0"
> > > > -
> > > > -
> > > > +SPDX_TEMP_DIR ?= "${WORKDIR}/spdx_temp"
> > > > +SPDX_MANIFEST_DIR ?= "/home/yocto/spdx_scans"
> > >
> > > Best Regards,
> > > Maxin
> > >
> >
> >
> >
> > --
> > _______________________________________________
> > Openembedded-core mailing list
> > Openembedded-core at lists.openembedded.org
> > http://lists.openembedded.org/mailman/listinfo/openembedded-core
>
>
> --
> _______________________________________________
> Openembedded-core mailing list
> Openembedded-core at lists.openembedded.org
> http://lists.openembedded.org/mailman/listinfo/openembedded-core
More information about the Openembedded-core
mailing list