[OE-core] [yocto] menuconf u-boot

Andrey Zhizhikin andrey.z at gmail.com
Fri Mar 13 18:21:02 UTC 2020


On Fri, Mar 13, 2020 at 7:15 PM Denys Dmytriyenko <denis at denix.org> wrote:
>
> On Fri, Mar 13, 2020 at 07:07:34PM +0100, Andrey Zhizhikin wrote:
> > JH,
> >
> > Please refer to my replies to Denys, cross-posting to unrelated lists
> > is generally not a good idea.
> >
> > On Fri, Mar 13, 2020 at 5:40 PM Denys Dmytriyenko <denis at denix.org> wrote:
> > >
> > > What's u-boot-imx?
> >
> > This is U-Boot fork for NXP devices (former Freescale),
>
> This was a rhetorical question - no answer was required.

That was mainly addressed to JH. :)

>
>
> > which is not maintained by OE-Core.
>
> Exactly my point.
>
>
> > > It's definitely not in openembedded-core, so there's no reason to cross-post
> > > there.
> > >
> > > If google doesn't help, it's recommended to post such specific questions to
> > > the corresponding mailing list for the layer this recipe comes from.
> >
> > The correct mailing list would be meta-freescale at yoctoproject.org and
> > JH already had some questions posted there.
> >
> > >
> > > If it's not clear where the recipe comes from, Layer Index can help:
> > > https://layers.openembedded.org/
> > >
> > > Thanks.
> > >
> > > --
> > > Denys
> > >
> > >
> > > On Fri, Mar 13, 2020 at 08:15:17PM +1100, JH wrote:
> > > > Hi,
> > > >
> > > > I tried to run bitbake -c menuconfig u-boot, it popped up a terminal
> > > > u-boot-imx configuration:
> >
> > It is not clear which yocto branch/machine you're trying to build
> > here. If you provide more details - then there is a bigger chance that
> > people would step in to assist you.
> >
> > > >
> > > > make: *** No rule make target 'menuconfig'. Stop.
> > > > Command failed.
> > > > Press any key to continue...
> > > >
> > > > How can I  run menuconfig u-boot?
> >
> > I've tried it now on the [master] branch of yocto for imx8mmevk
> > machine - it is building OK and I have the menuconfig from u-boot-imx.
> > Hence, please refer to my point above regarding more pre-information
> > on the issue.
> >
> > > >
> > > > Thank you.
> > > >
> > > > Kind regards,
> > > >
> > > > - jh
> > >
> > > > -=-=-=-=-=-=-=-=-=-=-=-
> > > > Links: You receive all messages sent to this group.
> > > >
> > > > View/Reply Online (#48751): https://lists.yoctoproject.org/g/yocto/message/48751
> > > > Mute This Topic: https://lists.yoctoproject.org/mt/71921973/3617104
> > > > Group Owner: yocto+owner at lists.yoctoproject.org
> > > > Unsubscribe: https://lists.yoctoproject.org/g/yocto/unsub  [denis at denix.org]
> > > > -=-=-=-=-=-=-=-=-=-=-=-
> > >
> > > --
> > > _______________________________________________
> > > Openembedded-core mailing list
> > > Openembedded-core at lists.openembedded.org
> > > http://lists.openembedded.org/mailman/listinfo/openembedded-core
> >
> >
> >
> > --
> > Regards,
> > Andrey.
> >



-- 
Regards,
Andrey.


More information about the Openembedded-core mailing list