Zaurus: Difference between revisions
(Undo revision 3312 by Yjytalamago (Talk)) |
PaulEggleton (talk | contribs) (Remove from FAQ section) |
||
| (One intermediate revision by the same user not shown) | |||
| Line 1: | Line 1: | ||
'''Technical information from [http://linuxtogo.org/gowiki/LinuxDevices LinuxDevices]''' | '''Technical information from [http://linuxtogo.org/gowiki/LinuxDevices LinuxDevices]''' | ||
* [http://linuxtogo.org/gowiki/ZaurusCollie collie] | * [http://www.linuxtogo.org/gowiki/ZaurusCollie collie] | ||
* [http://linuxtogo.org/gowiki/ZaurusPoodle poodle] | * [http://www.linuxtogo.org/gowiki/ZaurusPoodle poodle] | ||
* [http://linuxtogo.org/gowiki/ZaurusC7x0 c7x0] (corgi, shepherd, husky, boxer) | * [http://www.linuxtogo.org/gowiki/ZaurusC7x0 c7x0] (corgi, shepherd, husky, boxer) | ||
* [http://linuxtogo.org/gowiki/ZaurusAkita akita] | * [http://www.linuxtogo.org/gowiki/ZaurusAkita akita] | ||
* [http://linuxtogo.org/gowiki/ZaurusSpitz spitz] (borzoi, terrier) | * [http://www.linuxtogo.org/gowiki/ZaurusSpitz spitz] (borzoi, terrier) | ||
* [http://linuxtogo.org/gowiki/ZaurusTosa tosa] | * [http://www.linuxtogo.org/gowiki/ZaurusTosa tosa] | ||
'''kexecboot''' | '''kexecboot''' | ||
For the Zaurus a [http:// | For the Zaurus a [http://kexecboot.org special kernel+initramfs] has been developed. | ||
This special-purpose kernel is small enough to be flashed on NAND and features a framebuffer graphical menu for the selection of boot media containing the kernel to be kexec'ed in the second phase. | This special-purpose kernel is small enough to be flashed on NAND and features a framebuffer graphical menu for the selection of boot media containing the kernel to be kexec'ed in the second phase. | ||
| Line 31: | Line 31: | ||
[[Category:Machine]] | [[Category:Machine]] | ||
[[Category:User]] | [[Category:User]] | ||
Latest revision as of 17:02, 3 November 2012
Technical information from LinuxDevices
kexecboot
For the Zaurus a special kernel+initramfs has been developed. This special-purpose kernel is small enough to be flashed on NAND and features a framebuffer graphical menu for the selection of boot media containing the kernel to be kexec'ed in the second phase.
Multi-partition cards and lots of filesystems are supported. The kernels to be launched are searched for in /boot of each available partition. There is a also a configuration file (/boot/boot.cfg) which allows selection of other kernels, custom kernel command lines, and specifies the label and the icon for each instance.
How to install:
Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free (FAT or EXT2/3 formatted) partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On. In the Japanese Menu select 4 and finally 3 for SD card or 4 for CF).
For the SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: reset the unit, Press C and D button during restart.
NOTE: To fully clean your mtd partitions use 'flash_eraseall -j dev/mtd2' and 'flash_eraseall -j /dev/mtd3'. If you want a rootfs in nand, this must be in the .jffs2 format. Just rename your-image-rootfs.jffs2 to 'initrd.bin' and copy it on the card with updater.sh: the image will be flashed on /dev/mtd2. You can even have a second image in nand: updater.sh will search for a 'home.bin' file to be flashed on mtd3.