Zaurus: Difference between revisions
(New page: some technical (!) information about the Zaurus machines * collie * c7x0 (corgi, shepherd, husky, boxer) * akita * spitz (borzoi, terrier) * tosa = zaurus-installer = * tbd for collie w...) |
(First edit) |
||
| Line 1: | Line 1: | ||
some technical (!) information about the Zaurus machines | some technical (!) information about the Zaurus machines | ||
http://linuxtogo.org/gowiki/LinuxDevices | |||
* collie | * collie | ||
* c7x0 (corgi, shepherd, husky, boxer) | * c7x0 (corgi, shepherd, husky, boxer) | ||
| Line 9: | Line 10: | ||
= zaurus-installer = | = zaurus-installer = | ||
For the Zaurus a special kernel+initramfs has been developed. | |||
This special-purpose kernel is small enough to be flashed on NAND and features a frambefuffer graphical menu for the selection of the boot media containing the kernel which will be kexec'ed. | |||
Multipartitioned cards and lot of filesystems supported. | |||
The kernels to be launched are searched in /boot of each available partition. | |||
There is a also configuration file /boot/boot.cfg allowing to pass a custom cmdline and specify the label and the icon. | |||
How to install: | |||
Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On, in the Japanese Menu select 4 and finally 3 for SD card or 4 for CF). | |||
[[Image:http://downloads.conics.net/pda/zaurus-sl-c700/service-menus/maint-menu.jpg]] | |||
For SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: | |||
reset the unit, Press C, and D button during restart. | |||
See: http://linuxtogo.org/gowiki/CollieInstall | |||
[[Category:Machine]] | [[Category:Machine]] | ||
Revision as of 08:07, 4 August 2009
some technical (!) information about the Zaurus machines
http://linuxtogo.org/gowiki/LinuxDevices
- collie
- c7x0 (corgi, shepherd, husky, boxer)
- akita
- spitz (borzoi, terrier)
- tosa
zaurus-installer
For the Zaurus a special kernel+initramfs has been developed. This special-purpose kernel is small enough to be flashed on NAND and features a frambefuffer graphical menu for the selection of the boot media containing the kernel which will be kexec'ed.
Multipartitioned cards and lot of filesystems supported. The kernels to be launched are searched in /boot of each available partition. There is a also configuration file /boot/boot.cfg allowing to pass a custom cmdline and specify the label and the icon.
How to install:
Just unpack zaurus-installer-YOURMACHINE.tar.gz on a free partition: the package contains the kexecboot-kernel and the updater.sh utility. Then proceed as usual for flashing (switch off, pull battery out, insert battery again, before inserting AC plug press OK+Power On, in the Japanese Menu select 4 and finally 3 for SD card or 4 for CF). File:Http://downloads.conics.net/pda/zaurus-sl-c700/service-menus/maint-menu.jpg
For SL-5500 (collie) and optionally for other Zaurus too, flashing is possible just using the routines of the original firmware: reset the unit, Press C, and D button during restart.